Offshore steel structures and ship coating (heavy-duty)
Model

Jotatemp 210 epoxy

Jotatemp 210 (6C5) — in the Jotun range — is a epoxy product normally used as primer / intermediate coat / topcoat where atmospheric exposure / high temperature / low-temperature application conditions apply. For the complete technical data, request the manufacturer's TDS and SDS for Jotatemp 210.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jotatemp 210 — product overview

This is a two-component epoxy product, typically used as primer / intermediate coat / topcoat. It is characterised by manufactured to the manufacturer's technical data sheet; service environment atmospheric exposure / high temperature / low-temperature application; suitable for protective coating of carbon steel / galvanised steel / stainless steel.

Jotatemp 210 — positioning

Jotatemp 210 belongs to the epoxy family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure / high temperature / low-temperature application service.

Three things decide the system: the substrate (carbon steel / galvanised steel / stainless steel), the service environment (atmospheric exposure / high temperature / low-temperature application) and the design life. Together they set the number of coats and the total film thickness.

This model is manufactured to the manufacturer's technical data sheet.

Service environments include atmospheric exposure / high temperature / low-temperature application; send the actual conditions for anything outside that range.

Jotatemp 210 — key data

ModelJotatemp 210
Manufacturer product name6C5
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / high temperature / low-temperature application
Suitable substratescarbon steel / galvanised steel / stainless steel
Colour rangeGrey / Red / Aluminium
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / st 2
Volume solids60 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point26 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jotatemp-210.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.

Ask us for the current TDS for this product and we will send the values that apply to your conditions.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / galvanised steel / stainless steel / atmospheric exposure / high temperature / low-temperature application) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for Jotatemp 210 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Jotatemp 210 — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotatemp 210 and the intended use.

Jotatemp 210 — common questions

Where can I find the technical data for Jotatemp 210?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Jotatemp 210 take in the system?

This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Jotatemp 210?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Jotatemp 210

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jotatemp 210

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat