Jotatherm CSP1 Scrim auxiliary material
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotatherm CSP1 Scrim — product overview
This is a one-component auxiliary material product, typically used as reinforcement. It is characterised by manufactured to the manufacturer's technical data sheet; service environment as the system requires; suitable for protective coating of steel.
Jotatherm CSP1 Scrim — positioning
Jotatherm CSP1 Scrim (0L9) is the auxiliary material reinforcement in the Jotun range; this page sets out its system position, parameters and supply.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
This model is manufactured to the manufacturer's technical data sheet.
Typical service environment: as the system requires.
Jotatherm CSP1 Scrim — key data
| Model | Jotatherm CSP1 Scrim |
|---|---|
| Manufacturer product name | 0L9 |
| Resin system | auxiliary material |
| Components | one-component |
| Typical number of coats | reinforcement |
| Service environment | as the system requires |
| Colour range | As the system requires |
| Application method | lay between coats |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotatherm-csp1-scrim.pdf) |
Application and system notes
Application: lay between coats. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
These products are auxiliary materials (thinners, accelerators, inhibitors, anti-skid aggregate, reinforcement); they do not form a film of their own, and the manufacturer's TDS states no drying or curing times.
For verification, the original manufacturer's TDS for this model can be requested.
Usually applied as reinforcement; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the as the system requires environment.
Standards and approvals
- GB 38508-2020
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Jotatherm CSP1 Scrim — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotatherm CSP1 Scrim and the intended use.
Jotatherm CSP1 Scrim — common questions
Which substrates can Jotatherm CSP1 Scrim be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Jotatherm CSP1 Scrim?
The service environment for this model is as the system requires. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Jotatherm CSP1 Scrim have, and how is it mixed?
This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Jotatherm CSP1 Scrim
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotatherm CSP1 Scrim
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net