Offshore steel structures and ship coating (heavy-duty)
Model

Barrier ZEP zinc-containing epoxy

A zinc-containing epoxy primer in the Jotun range, Barrier ZEP (2T8) is selected for steel structures exposed to atmospheric exposure. For the complete technical data, request the manufacturer's TDS and SDS for Barrier ZEP.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Barrier ZEP — product overview

A two-component zinc-containing epoxy coating, normally used as primer: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on carbon steel.

Barrier ZEP — positioning

Barrier ZEP (2T8) — in the Jotun range — is a zinc-containing epoxy product normally used as primer where atmospheric exposure conditions apply.

The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

This model is manufactured to the manufacturer's technical data sheet.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Barrier ZEP — key data

ModelBarrier ZEP
Manufacturer product name2T8
Resin systemzinc-containing epoxy
Componentstwo-component
Typical number of coatsprimer
Service environmentatmospheric exposure
Suitable substratescarbon steel
Colour rangeGrey
Application methodairless spray / brush
Surface preparation gradesa 2½ / sa 2
Volume solids54 % ± 2 %
Density (specific gravity)1.8 kg/l
Flash point27 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-barrier-zep.pdf)

Application and system notes

Application: airless spray / brush (sa 2½ / sa 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry50 min20 min10 min6 min
Walk-on dry16 h8 h4 h2 h
Recoat, minimum16 h8 h4 h2 h
Dried/cured for service10 d7 d5 d2 d

Data taken from the manufacturer's TDS jotun-barrier-zep.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Barrier ZEP — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

For the full technical data on Barrier ZEP, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Barrier ZEP — common questions

How is the recoat interval for Barrier ZEP controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Barrier ZEP be used on?

The TDS lists the substrate as carbon steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

What service environment suits Barrier ZEP?

The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

Models related to Barrier ZEP

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Barrier ZEP

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat