Barrier 65 S zinc-containing epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Barrier 65 S — product overview
A two-component zinc-containing epoxy coating, normally used as primer: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on carbon steel / galvanised steel.
Barrier 65 S — positioning
Jotun's Barrier 65 S is a zinc-containing epoxy primer for atmospheric exposure conditions, supplied with its technical documentation.
Three things decide the system: the substrate (carbon steel / galvanised steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
This model is manufactured to the manufacturer's technical data sheet.
Typical service environment: atmospheric exposure.
Barrier 65 S — key data
| Model | Barrier 65 S |
|---|---|
| Manufacturer product name | 6YD |
| Resin system | zinc-containing epoxy |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel / galvanised steel |
| Colour range | Grey |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 |
| Volume solids | 66 % ± 2 % |
| Density (specific gravity) | 1.9 kg/l |
| Flash point | 28 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-barrier-65-s.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- ASTM D520
- GB 30981.2
- GB 30981.2-2025
- ISO 12944-4
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standards and approvals for Barrier 65 S follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Barrier 65 S — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Barrier 65 S and the intended use.
Barrier 65 S — common questions
How many components does Barrier 65 S have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Barrier 65 S?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Barrier 65 S take in the system?
This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
Models related to Barrier 65 S
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Barrier 65 S
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net