Barrier 80 E zinc-containing epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Barrier 80 E — product overview
Barrier 80 E belongs to the zinc-containing epoxy system and is a three-component product used as primer; service environment atmospheric exposure; application and system notes are set out below.
Barrier 80 E — positioning
Barrier 80 E (06Q) — in the Jotun range — is a zinc-containing epoxy product normally used as primer where atmospheric exposure conditions apply.
The substrate for this product is carbon steel / galvanised steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
This model is manufactured to the manufacturer's technical data sheet.
Typical service environment: atmospheric exposure.
Barrier 80 E — key data
| Model | Barrier 80 E |
|---|---|
| Manufacturer product name | 06Q |
| Resin system | zinc-containing epoxy |
| Components | three-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel / galvanised steel |
| Colour range | Grey |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 |
| Volume solids | 89 % ± 2 % |
| Density (specific gravity) | 2.8 kg/l |
| Flash point | 100 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-barrier-80-e.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 15 h | 10 h | 5 h | 2.5 h | 1.5 h |
| Walk-on dry | 36 h | 24 h | 11 h | 3.5 h | 2.5 h |
| Recoat, minimum | 20 h | 15 h | 6 h | 3.5 h | 2.5 h |
| Dried/cured for service | 14 d | 10 d | 7 d | 5 d | 2 d |
Data taken from the manufacturer's TDS jotun-barrier-80-e.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- ASTM D520
- GB 38508-2020
- ISO 12944-2
- ISO 12944-5
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standards and approvals for Barrier 80 E follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Barrier 80 E — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
To get the manufacturer TDS and SDS for Barrier 80 E, send a request at the foot of this page, or contact us on WhatsApp or by email.
Barrier 80 E — common questions
Which substrates can Barrier 80 E be used on?
The TDS lists the substrate as carbon steel / galvanised steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Barrier 80 E?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Barrier 80 E have, and how is it mixed?
This model is a three-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Barrier 80 E
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Barrier 80 E
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net