Barrier Plus zinc-containing epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Barrier Plus — product overview
two-component zinc-containing epoxy product for use as primer; high solids; substrates carbon steel / galvanised steel; service environment atmospheric exposure.
Barrier Plus — positioning
Barrier Plus (0B6) — in the Jotun range — is a zinc-containing epoxy product normally used as primer where atmospheric exposure conditions apply.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Where high solids are specified, it combines with other products of the same system into a complete scheme.
Service environments include atmospheric exposure; send the actual conditions for anything outside that range.
Barrier Plus — key data
| Model | Barrier Plus |
|---|---|
| Manufacturer product name | 0B6 |
| Resin system | zinc-containing epoxy |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel / galvanised steel |
| Key characteristics | high solids |
| Colour range | Grey |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 |
| Volume solids | 60 % ± 2 % |
| Density (specific gravity) | 2.8 kg/l |
| Flash point | 27 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-barrier-plus.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 2 h | 1.5 h | 1 h | 25 min | 10 min |
| Recoat, minimum | 5 h | 4 h | 3 h | 2 h | 1.5 h |
Data taken from the manufacturer's TDS jotun-barrier-plus.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / galvanised steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- ASTM D520
- GB 30981-2020
- IMO 2010 FTP
- ISO 12944
- ISO 12944-2
- ISO 12944-4
- ISO 20340
- ISO 2813
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Barrier Plus — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
To get the manufacturer TDS and SDS for Barrier Plus, send a request at the foot of this page, or contact us on WhatsApp or by email.
Barrier Plus — common questions
Where can I find the technical data for Barrier Plus?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Barrier Plus take in the system?
This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Barrier Plus?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Barrier Plus
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Barrier Plus
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net