Offshore steel structures and ship coating (heavy-duty)
Model

Thinner NO 21 auxiliary material

Thinner NO 21 is the auxiliary material thinner in Jotun's protective coatings line, specified for as the system requires service. For the complete technical data, request the manufacturer's TDS and SDS for Thinner NO 21.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Thinner NO 21 — product overview

Thinner NO 21 belongs to the auxiliary material system and is a one-component product used as thinner; service environment as the system requires; application and system notes are set out below.

Thinner NO 21 — positioning

Thinner NO 21 () — in the Jotun range — is a auxiliary material product normally used as thinner where as the system requires conditions apply.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

It is used for protective coating work in as the system requires conditions.

Thinner NO 21 — key data

ModelThinner NO 21
Manufacturer product name
Resin systemauxiliary material
Componentsone-component
Typical number of coatsthinner
Service environmentas the system requires
Colour rangeColourless
Application methodthin the companion coating
Density (specific gravity)0.9 kg/l
Flash point66 °C
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-thinner-no-21.pdf)

Application and system notes

Application: thin the companion coating. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

These products are auxiliary materials (thinners, accelerators, inhibitors, anti-skid aggregate, reinforcement); they do not form a film of their own, and the manufacturer's TDS states no drying or curing times.

For verification, the original manufacturer's TDS for this model can be requested.

Coat sequence, film thickness and quantity depend on the service conditions (steel / as the system requires) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.

Thinner NO 21 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

For the full technical data on Thinner NO 21, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Thinner NO 21 — common questions

What service environment suits Thinner NO 21?

The service environment for this model is as the system requires. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.

How many components does Thinner NO 21 have, and how is it mixed?

This model is a one-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Thinner NO 21?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Models related to Thinner NO 21

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Thinner NO 21

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat