Tankguard 412 epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Tankguard 412 — product overview
two-component epoxy product for use as primer / intermediate coat / topcoat; chemical-resistant / potable water tanks; substrates carbon steel / galvanised steel / stainless steel / concrete; service environment atmospheric exposure / immersion service.
Tankguard 412 — positioning
A epoxy primer / intermediate coat / topcoat in the Jotun range, Tankguard 412 (0UH) is selected for steel structures exposed to atmospheric exposure / immersion service.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
It suits projects where chemical-resistant / potable water tanks matters — tight application windows or demanding maintenance regimes.
It is used for protective coating work in atmospheric exposure / immersion service conditions.
Tankguard 412 — key data
| Model | Tankguard 412 |
|---|---|
| Manufacturer product name | 0UH |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer / intermediate coat / topcoat |
| Service environment | atmospheric exposure / immersion service |
| Suitable substrates | carbon steel / galvanised steel / stainless steel / concrete |
| Key characteristics | chemical-resistant / potable water tanks |
| Colour range | Black / Green / Red / White / Light grey |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ |
| Volume solids | 98 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 100 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-tankguard-412.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 15 h | 6 h | 1.5 h |
| Walk-on dry | 30 h | 12 h | 4 h |
| Recoat, minimum | 30 h | 12 h | 4 h |
| Dried/cured for service | 15 d | 7 d | 4 d |
Data taken from the manufacturer's TDS jotun-tankguard-412.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer / intermediate coat / topcoat; the number of coats and the quantity per unit depend on the surface condition of the carbon steel / galvanised steel / stainless steel / concrete and the corrosivity of the atmospheric exposure / immersion service environment.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- NACE No. 6
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Tankguard 412 — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
To get the manufacturer TDS and SDS for Tankguard 412, send a request at the foot of this page, or contact us on WhatsApp or by email.
Tankguard 412 — common questions
Which substrates can Tankguard 412 be used on?
The TDS lists the substrate as carbon steel / galvanised steel / stainless steel / concrete; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Tankguard 412?
The service environment for this model is atmospheric exposure / immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Tankguard 412 have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Tankguard 412
- Jotacote HF002
- Jotacote Universal
- Jotacote Universal HF002
- Jotacote Xtend GF
- Jotaguard 100
- Jotaprime 500
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Tankguard 412
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net