SeaForce NE industrial coating
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
SeaForce NE — product overview
SeaForce NE belongs to the industrial coating system and is a one-component product used as primer / topcoat / antifouling; service environment immersion service; application and system notes are set out below.
SeaForce NE — positioning
SeaForce NE belongs to the industrial coating family of Jotun protective coatings and is used as primer / topcoat / antifouling in immersion service service.
The substrate for this product is carbon steel / wood. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Service environments include immersion service; send the actual conditions for anything outside that range.
SeaForce NE — key data
| Model | SeaForce NE |
|---|---|
| Manufacturer product name | NE |
| Resin system | industrial coating |
| Components | one-component |
| Typical number of coats | primer / topcoat / antifouling |
| Service environment | immersion service |
| Suitable substrates | carbon steel / wood |
| Colour range | light red / Dark red |
| Application method | airless spray / brush / roller |
| Volume solids | 60 % ± 2 % |
| Density (specific gravity) | 1.4 kg/l |
| Flash point | 27 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-seaforce-ne.pdf) |
Application and system notes
Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | -10 °C | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|---|
| Touch dry | 3 h | 2 h | 1 h | 45 min | 30 min | 20 min |
| Recoat, minimum | 48 h | 36 h | 12 h | 9 h | 7 h | 5 h |
Data taken from the manufacturer's TDS jotun-seaforce-ne.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / wood), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
SeaForce NE — requesting technical data
Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.
To get the manufacturer TDS and SDS for SeaForce NE, send a request at the foot of this page, or contact us on WhatsApp or by email.
SeaForce NE — common questions
How is the recoat interval for SeaForce NE controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can SeaForce NE be used on?
The TDS lists the substrate as carbon steel / wood; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits SeaForce NE?
The service environment for this model is immersion service. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
Models related to SeaForce NE
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for SeaForce NE
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net