Pilot QD Primer Plus alkyd
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Pilot QD Primer Plus — product overview
This is a one-component alkyd product, typically used as primer / intermediate coat. It is characterised by fast-drying / high-build; service environment atmospheric exposure; suitable for protective coating of carbon steel / wood.
Pilot QD Primer Plus — positioning
Pilot QD Primer Plus (0Z6) — in the Jotun range — is a alkyd product normally used as primer / intermediate coat where atmospheric exposure conditions apply.
Three things decide the system: the substrate (carbon steel / wood), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.
Where fast-drying / high-build are specified, it combines with other products of the same system into a complete scheme.
Service environments include atmospheric exposure; send the actual conditions for anything outside that range.
Pilot QD Primer Plus — key data
| Model | Pilot QD Primer Plus |
|---|---|
| Manufacturer product name | 0Z6 |
| Resin system | alkyd |
| Components | one-component |
| Typical number of coats | primer / intermediate coat |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel / wood |
| Key characteristics | fast-drying / high-build |
| Colour range | Grey / Red |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ / st 2 |
| Volume solids | 56 % ± 2 % |
| Density (specific gravity) | 1.6 kg/l |
| Flash point | 26 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-pilot-qd-primer-plus.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½ / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|
| Touch dry | 35 min | 25 min | 20 min | 15 min |
| Walk-on dry | 3 h | 2.5 h | 2 h | 1.5 h |
| Recoat, minimum | 3 h | 2.5 h | 2 h | 1.5 h |
Data taken from the manufacturer's TDS jotun-pilot-qd-primer-plus.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / wood / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- IMO 2010 FTP
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Pilot QD Primer Plus — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
To get the manufacturer TDS and SDS for Pilot QD Primer Plus, send a request at the foot of this page, or contact us on WhatsApp or by email.
Pilot QD Primer Plus — common questions
Where can I find the technical data for Pilot QD Primer Plus?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Pilot QD Primer Plus take in the system?
This model is typically used as primer / intermediate coat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Pilot QD Primer Plus?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Pilot QD Primer Plus
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Pilot QD Primer Plus
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net