Offshore steel structures and ship coating (heavy-duty)
Model

Penguard Tie Coat 100 epoxy

Penguard Tie Coat 100 belongs to the epoxy family of Jotun protective coatings and is used as primer in atmospheric exposure service. For the complete technical data, request the manufacturer's TDS and SDS for Penguard Tie Coat 100.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard Tie Coat 100 — product overview

A two-component epoxy coating, normally used as primer: key features manufactured to the manufacturer's technical data sheet; used in atmospheric exposure; suitable on galvanised steel.

Penguard Tie Coat 100 — positioning

Penguard Tie Coat 100 (0FG) is the epoxy primer in the Jotun range; this page sets out its system position, parameters and supply.

Three things decide the system: the substrate (galvanised steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.

Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.

Service environments include atmospheric exposure; send the actual conditions for anything outside that range.

Penguard Tie Coat 100 — key data

ModelPenguard Tie Coat 100
Manufacturer product name0FG
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer
Service environmentatmospheric exposure
Suitable substratesgalvanised steel
Colour rangeRed
Application methodairless spray / brush
Volume solids42 % ± 2 %
Density (specific gravity)1.4 kg/l
Flash point25 °C
GlossSemi-gloss (35-70)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-tie-coat-100.pdf)

Application and system notes

Application: airless spray / brush. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature5 °C10 °C23 °C40 °C
Touch dry5 h2 h1 h30 min
Walk-on dry24 h14 h6.5 h3 h
Recoat, minimum24 h18 h6 h3 h
Dried/cured for service16 d14 d7 d3 d

Data taken from the manufacturer's TDS jotun-penguard-tie-coat-100.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (galvanised steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standards and approvals for Penguard Tie Coat 100 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Penguard Tie Coat 100 — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Penguard Tie Coat 100 and the intended use.

Penguard Tie Coat 100 — common questions

How many components does Penguard Tie Coat 100 have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Penguard Tie Coat 100?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Penguard Tie Coat 100 take in the system?

This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Penguard Tie Coat 100

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard Tie Coat 100

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat