Offshore steel structures and ship coating (heavy-duty)
Model

Penguard Special epoxy

Penguard Special (0FD) — in the Jotun range — is a epoxy product normally used as primer where atmospheric exposure conditions apply. This model offers high-build. For the complete technical data, request the manufacturer's TDS and SDS for Penguard Special.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard Special — product overview

This is a two-component epoxy product, typically used as primer. It is characterised by high-build; service environment atmospheric exposure; suitable for protective coating of carbon steel / galvanised steel / stainless steel.

Penguard Special — positioning

Jotun's Penguard Special is a epoxy primer for atmospheric exposure conditions, supplied with its technical documentation.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

Where high-build are specified, it combines with other products of the same system into a complete scheme.

Typical service environment: atmospheric exposure.

Penguard Special — key data

ModelPenguard Special
Manufacturer product name0FD
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer
Service environmentatmospheric exposure
Suitable substratescarbon steel / galvanised steel / stainless steel
Key characteristicshigh-build
Colour rangeGrey / Red / White
Application methodairless spray / brush
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids50 % ± 2 %
Density (specific gravity)1.3 kg/l
Flash point25 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-special.pdf)

Application and system notes

Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C23 °C40 °C
Touch dry4 h2 h1 h
Walk-on dry16 h8 h3 h
Recoat, minimum16 h8 h3 h
Dried/cured for service14 d7 d3 d

Data taken from the manufacturer's TDS jotun-penguard-special.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / galvanised steel / stainless steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for Penguard Special follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Penguard Special — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

For the full technical data on Penguard Special, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.

Penguard Special — common questions

How many components does Penguard Special have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Penguard Special?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Penguard Special take in the system?

This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Penguard Special

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard Special

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat