Offshore steel structures and ship coating (heavy-duty)
Model

Penguard HSP ZP epoxy

Penguard HSP ZP is a epoxy primer from the Jotun range, formulated for steel structures in atmospheric exposure. This model offers fast-drying / high solids / high-build. For the complete technical data, request the manufacturer's TDS and SDS for Penguard HSP ZP.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard HSP ZP — product overview

This is a two-component epoxy product, typically used as primer. It is characterised by fast-drying / high solids / high-build; service environment atmospheric exposure; suitable for protective coating of carbon steel.

Penguard HSP ZP — positioning

Penguard HSP ZP is the epoxy primer in Jotun's protective coatings line, specified for atmospheric exposure service.

Three things decide the system: the substrate (carbon steel), the service environment (atmospheric exposure) and the design life. Together they set the number of coats and the total film thickness.

Where fast-drying / high solids / high-build are specified, it combines with other products of the same system into a complete scheme.

It is used for protective coating work in atmospheric exposure conditions.

Penguard HSP ZP — key data

ModelPenguard HSP ZP
Manufacturer product name0G7
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer
Service environmentatmospheric exposure
Suitable substratescarbon steel
Key characteristicsfast-drying / high solids / high-build
Colour rangeLight yellow / Red / dark grey
Application methodairless spray / brush
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids73 % ± 2 %
Density (specific gravity)1.6 kg/l
Flash point29 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-hsp-zp.pdf)

Application and system notes

Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature0 °C5 °C10 °C23 °C40 °C
Touch dry11 h5 h2 h1 h30 min
Walk-on dry18 h12 h6 h3 h2 h
Recoat, minimum18 h12 h4 h2 h1 h
Dried/cured for service21 d13 d8 d4 d3 d

Data taken from the manufacturer's TDS jotun-penguard-hsp-zp.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the atmospheric exposure environment.

Standards and approvals

Standards and approvals for Penguard HSP ZP follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Penguard HSP ZP — requesting technical data

Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.

To get the manufacturer TDS and SDS for Penguard HSP ZP, send a request at the foot of this page, or contact us on WhatsApp or by email.

Penguard HSP ZP — common questions

Which coat does Penguard HSP ZP take in the system?

This model is typically used as primer. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Penguard HSP ZP?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

What are the key characteristics of Penguard HSP ZP?

This model offers fast-drying / high solids / high-build. Suitability for a particular service condition still has to be assessed together with the complete coating system.

Models related to Penguard HSP ZP

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard HSP ZP

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat