Offshore steel structures and ship coating (heavy-duty)
Model

Penguard HSP MIO E epoxy

A epoxy primer / intermediate coat in the Jotun range, Penguard HSP MIO E (0N4) is selected for steel structures exposed to atmospheric exposure. This model offers fast-drying / high solids / high-build. For the complete technical data, request the manufacturer's TDS and SDS for Penguard HSP MIO E.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Penguard HSP MIO E — product overview

This is a two-component epoxy product, typically used as primer / intermediate coat. It is characterised by fast-drying / high solids / high-build; service environment atmospheric exposure; suitable for protective coating of carbon steel / galvanised steel / stainless steel.

Penguard HSP MIO E — positioning

Jotun's Penguard HSP MIO E is a epoxy primer / intermediate coat for atmospheric exposure conditions, supplied with its technical documentation.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

Where fast-drying / high solids / high-build are specified, it combines with other products of the same system into a complete scheme.

Typical service environment: atmospheric exposure.

Penguard HSP MIO E — key data

ModelPenguard HSP MIO E
Manufacturer product name0N4
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat
Service environmentatmospheric exposure
Suitable substratescarbon steel / galvanised steel / stainless steel
Key characteristicsfast-drying / high solids / high-build
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids75 % ± 2 %
Density (specific gravity)1.7 kg/l
Flash point27 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-penguard-hsp-mio-e.pdf)

Application and system notes

Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature0 °C5 °C10 °C23 °C40 °C
Touch dry11 h5 h2 h1 h30 min
Walk-on dry18 h12 h6 h3 h2 h
Recoat, minimum18 h12 h4 h2 h1 h
Dried/cured for service21 d13 d8 d4 d3 d

Data taken from the manufacturer's TDS jotun-penguard-hsp-mio-e.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.

Penguard HSP MIO E — requesting technical data

Quotations and application plans rest on film thickness, spreading rate and curing time — all taken from the original TDS.

To get the manufacturer TDS and SDS for Penguard HSP MIO E, send a request at the foot of this page, or contact us on WhatsApp or by email.

Penguard HSP MIO E — common questions

Where can I find the technical data for Penguard HSP MIO E?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Penguard HSP MIO E take in the system?

This model is typically used as primer / intermediate coat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

What are the minimum order quantity and lead time for Penguard HSP MIO E?

Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.

Models related to Penguard HSP MIO E

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Penguard HSP MIO E

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat