Penguard Express Lite epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Penguard Express Lite — product overview
A two-component epoxy coating, normally used as primer: key features fast-drying / high-build; used in atmospheric exposure; suitable on steel.
Penguard Express Lite — positioning
Penguard Express Lite is the epoxy primer in Jotun's protective coatings line, specified for atmospheric exposure service.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
It suits projects where fast-drying / high-build matters — tight application windows or demanding maintenance regimes.
It is used for protective coating work in atmospheric exposure conditions.
Penguard Express Lite — key data
| Model | Penguard Express Lite |
|---|---|
| Manufacturer product name | 657 |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Key characteristics | fast-drying / high-build |
| Colour range | Zinc phosphate grey / zinc phosphate light grey / zinc phosphate red |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 74 % ± 2 % |
| Flash point | 29 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-penguard-express-lite.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
Drying and curing times are confirmed against the current manufacturer's technical data sheet for each batch and project. Rather than publish figures that may have been superseded, we quote them with the TDS.
Ask us for the current TDS for this product and we will send the values that apply to your conditions.
Within a system, the coat sequence and film thickness depend on the substrate (steel), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.
Standards and approvals
- GB 30981.2
- GB 30981.2-2025
- ISO 12944
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- Norsok M-501
Standards and approvals for Penguard Express Lite follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Penguard Express Lite — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
To get the manufacturer TDS and SDS for Penguard Express Lite, send a request at the foot of this page, or contact us on WhatsApp or by email.
Penguard Express Lite — common questions
How is the recoat interval for Penguard Express Lite controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Penguard Express Lite be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Penguard Express Lite?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
Models related to Penguard Express Lite
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Penguard Express Lite
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net