Muki Z 2008 temporary protective material
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Muki Z 2008 — product overview
Muki Z 2008 belongs to the temporary protective material system and is a one-component product used as rust prevention (temporary protection); service environment atmospheric exposure; application and system notes are set out below.
Muki Z 2008 — positioning
Jotun's Muki Z 2008 is a temporary protective material rust prevention (temporary protection) for atmospheric exposure conditions, supplied with its technical documentation.
The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
The model is notable for fast-drying / abrasion-resistant.
It is used for protective coating work in atmospheric exposure conditions.
Muki Z 2008 — key data
| Model | Muki Z 2008 |
|---|---|
| Manufacturer product name | 0HT |
| Resin system | temporary protective material |
| Components | one-component |
| Typical number of coats | rust prevention (temporary protection) |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel |
| Key characteristics | fast-drying / abrasion-resistant |
| Colour range | To the manufacturer colour card |
| Application method | spray or brush |
| Surface preparation grade | sa 2½ |
| Volume solids | 28 % ± 2 % |
| Density (specific gravity) | 1.3 kg/l |
| Flash point | 14 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-muki-z-2008.pdf) |
Application and system notes
Application: spray or brush (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 23 °C | 40 °C |
|---|---|---|
| Touch dry | 1 min | 1 min |
| Walk-on dry | 3 min | 1 min |
| Recoat, minimum | 1 d | 1 d |
Data taken from the manufacturer's TDS jotun-muki-z-2008.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as rust prevention (temporary protection); the number of coats and the quantity per unit depend on the surface condition of the carbon steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 17652-2
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- PSPC
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Muki Z 2008 — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Muki Z 2008 and the intended use.
Muki Z 2008 — common questions
What are the key characteristics of Muki Z 2008?
This model offers fast-drying / abrasion-resistant. Suitability for a particular service condition still has to be assessed together with the complete coating system.
How is the recoat interval for Muki Z 2008 controlled?
The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.
Which substrates can Muki Z 2008 be used on?
The TDS lists the substrate as carbon steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
Models related to Muki Z 2008
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Muki Z 2008
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net