Offshore steel structures and ship coating (heavy-duty)
Model

Marathon 500 epoxy

Marathon 500 belongs to the epoxy family of Jotun protective coatings and is used as primer / intermediate coat / topcoat in atmospheric exposure / immersion service service. This model offers high solids / high-build / surface-tolerant / abrasion-resistant. For the complete technical data, request the manufacturer's TDS and SDS for Marathon 500.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Marathon 500 — product overview

Marathon 500 belongs to the epoxy system and is a two-component product used as primer / intermediate coat / topcoat; service environment atmospheric exposure / immersion service; application and system notes are set out below.

Marathon 500 — positioning

Marathon 500 (0H7) is the epoxy primer / intermediate coat / topcoat in the Jotun range; this page sets out its system position, parameters and supply.

Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.

It suits projects where high solids / high-build / surface-tolerant / abrasion-resistant matters — tight application windows or demanding maintenance regimes.

Service environments include atmospheric exposure / immersion service; send the actual conditions for anything outside that range.

Marathon 500 — key data

ModelMarathon 500
Manufacturer product name0H7
Resin systemepoxy
Componentstwo-component
Typical number of coatsprimer / intermediate coat / topcoat
Service environmentatmospheric exposure / immersion service
Suitable substratescarbon steel / galvanised steel / stainless steel / concrete
Key characteristicshigh solids / high-build / surface-tolerant / abrasion-resistant
Colour rangeA range of colours (colour card on request)
Application methodairless spray / brush / roller
Surface preparation gradesa 2½ / sa 2 / st 2
Volume solids85 % ± 2 %
Density (specific gravity)1.6 kg/l
Flash point43 °C
GlossGloss (70-85)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-marathon-500.pdf)

Application and system notes

Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature10 °C15 °C23 °C40 °C
Touch dry14 h10 h4 h1.5 h
Walk-on dry24 h18 h8 h3 h
Recoat, minimum24 h18 h8 h3 h

Data taken from the manufacturer's TDS jotun-marathon-500.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Within a system, the coat sequence and film thickness depend on the substrate (carbon steel / galvanised steel / stainless steel / concrete), the corrosivity category and the design life; send the project conditions and we can recommend both sequence and quantity.

Standards and approvals

Standards and approvals for Marathon 500 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Marathon 500 — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Marathon 500 and the intended use.

Marathon 500 — common questions

How many components does Marathon 500 have, and how is it mixed?

This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.

Where can I find the technical data for Marathon 500?

Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.

Which coat does Marathon 500 take in the system?

This model is typically used as primer / intermediate coat / topcoat. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.

Models related to Marathon 500

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Marathon 500

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat