Jotun Thinner No. 65 auxiliary material
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotun Thinner No. 65 — product overview
Jotun Thinner No. 65 belongs to the auxiliary material system and is a one-component product used as thinner; service environment as the system requires; application and system notes are set out below.
Jotun Thinner No. 65 — positioning
Jotun Thinner No. 65 () is the auxiliary material thinner in the Jotun range; this page sets out its system position, parameters and supply.
Three things decide the system: the substrate (steel), the service environment (as the system requires) and the design life. Together they set the number of coats and the total film thickness.
This model is manufactured to the manufacturer's technical data sheet.
It is used for protective coating work in as the system requires conditions.
Jotun Thinner No. 65 — key data
| Model | Jotun Thinner No. 65 |
|---|---|
| Manufacturer product name | |
| Resin system | auxiliary material |
| Components | one-component |
| Typical number of coats | thinner |
| Service environment | as the system requires |
| Colour range | Colourless |
| Application method | thin the companion coating |
| Flash point | 27 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-thinner-no-65.pdf) |
Application and system notes
Application: thin the companion coating. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
These products are auxiliary materials (thinners, accelerators, inhibitors, anti-skid aggregate, reinforcement); they do not form a film of their own, and the manufacturer's TDS states no drying or curing times.
For verification, the original manufacturer's TDS for this model can be requested.
Coat sequence, film thickness and quantity depend on the service conditions (steel / as the system requires) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- GB 30981-2020
- GB 38505-2020
- GB 38508-2020
- ISO 3233
- ISO 3679
Standard numbers are given for selection checks; valid, in-date documents for formal tenders or acceptance are supplied per model.
Jotun Thinner No. 65 — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
For the full technical data on Jotun Thinner No. 65, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Jotun Thinner No. 65 — common questions
Where can I find the technical data for Jotun Thinner No. 65?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Which coat does Jotun Thinner No. 65 take in the system?
This model is typically used as thinner. The number of coats and film thickness depend on the substrate, the corrosivity category and the design life.
What are the minimum order quantity and lead time for Jotun Thinner No. 65?
Supply is in full drums or full pallets, with staged deliveries to match the application programme. Coatings are flammable dangerous goods carried by licensed carriers; lead time is confirmed by model and quantity.
Models related to Jotun Thinner No. 65
- Jotun Thinner No. 10
- Jotun Thinner No. 11
- Jotun Thinner No. 12
- Jotun Thinner No. 16
- Jotun Thinner No. 18
- Jotun Thinner No. 19
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotun Thinner No. 65
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net