Jotun 71672 epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotun 71672 — product overview
two-component epoxy product for use as primer; manufactured to the manufacturer's technical data sheet; substrates carbon steel; service environment atmospheric exposure.
Jotun 71672 — positioning
Jotun 71672 () is the epoxy primer in the Jotun range; this page sets out its system position, parameters and supply.
The substrate for this product is carbon steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Typical service environment: atmospheric exposure.
Jotun 71672 — key data
| Model | Jotun 71672 |
|---|---|
| Manufacturer product name | |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Suitable substrates | carbon steel |
| Colour range | Light yellow / Grey / Red |
| Application method | airless spray / brush |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 73 % ± 2 % |
| Density (specific gravity) | 1.6 kg/l |
| Flash point | 29 °C |
| Gloss | Matt (0-35) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-71672.pdf) |
Application and system notes
Application: airless spray / brush (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
|---|---|---|---|---|---|
| Touch dry | 11 h | 5 h | 2 h | 1 h | 30 min |
| Walk-on dry | 18 h | 12 h | 6 h | 3 h | 2 h |
| Recoat, minimum | 18 h | 12 h | 4 h | 2 h | 1 h |
| Dried/cured for service | 21 d | 13 d | 8 d | 4 d | 3 d |
Data taken from the manufacturer's TDS jotun-71672.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Coat sequence, film thickness and quantity depend on the service conditions (carbon steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.
Standards and approvals
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
Standards and approvals for Jotun 71672 follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.
Jotun 71672 — requesting technical data
Volume solids, single-coat dry film thickness, recoat interval, drying time and VOC are as stated in the manufacturer's TDS.
Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jotun 71672 and the intended use.
Jotun 71672 — common questions
What service environment suits Jotun 71672?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Jotun 71672 have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Jotun 71672?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to Jotun 71672
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotun 71672
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net