Jotapipe FC 400 epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotapipe FC 400 — product overview
Jotapipe FC 400 belongs to the epoxy system and is a two-component product used as single-coat system / lining; service environment atmospheric exposure; application and system notes are set out below.
Jotapipe FC 400 — positioning
Jotapipe FC 400 (0D9) — in the Jotun range — is a epoxy product normally used as single-coat system / lining where atmospheric exposure conditions apply.
Within a coating system it can take the appropriate coat for steelwork, tanks and pipelines; the coat sequence and thickness follow the manufacturer's recommended scheme.
Manufactured to the manufacturer's technical data sheet; the service data on this page follow it.
Typical service environment: atmospheric exposure.
Jotapipe FC 400 — key data
| Model | Jotapipe FC 400 |
|---|---|
| Manufacturer product name | 0D9 |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | single-coat system / lining |
| Service environment | atmospheric exposure |
| Colour range | Red |
| Application method | airless spray |
| Surface preparation grade | sa 2½ |
| Volume solids | 98 % ± 2 % |
| Density (specific gravity) | 1.5 kg/l |
| Flash point | 100 °C |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotapipe-fc-400.pdf) |
Application and system notes
Application: airless spray (sa 2½). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 15 h | 6 h | 1.5 h |
| Dried/cured for service | 15 d | 7 d | 4 d |
Data taken from the manufacturer's TDS jotun-jotapipe-fc-400.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as single-coat system / lining; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- GB 30981-2020
- GB 38508-2020
- ISO 3233
- ISO 3679
- ISO 8501-1
- ISO 8503-2
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Jotapipe FC 400 — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
To get the manufacturer TDS and SDS for Jotapipe FC 400, send a request at the foot of this page, or contact us on WhatsApp or by email.
Jotapipe FC 400 — common questions
Which substrates can Jotapipe FC 400 be used on?
The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.
What service environment suits Jotapipe FC 400?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Jotapipe FC 400 have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Models related to Jotapipe FC 400
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotapipe FC 400
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net