Jotacote Universal S120 epoxy
China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.
This model belongs to the categories below; select a tag to see every model in that category.
Jotacote Universal S120 — product overview
This is a two-component epoxy product, typically used as primer. It is characterised by high-build; service environment atmospheric exposure; suitable for protective coating of steel.
Jotacote Universal S120 — positioning
A epoxy primer in the Jotun range, Jotacote Universal S120 (6HA) is selected for steel structures exposed to atmospheric exposure.
The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.
The model is notable for high-build.
Typical service environment: atmospheric exposure.
Jotacote Universal S120 — key data
| Model | Jotacote Universal S120 |
|---|---|
| Manufacturer product name | 6HA |
| Resin system | epoxy |
| Components | two-component |
| Typical number of coats | primer |
| Service environment | atmospheric exposure |
| Key characteristics | high-build |
| Colour range | Light yellow / light red / light green / light grey |
| Application method | airless spray / brush / roller |
| Surface preparation grade | sa 2½ / sa 2 / st 2 |
| Volume solids | 97 % ± 2 % |
| Density (specific gravity) | 1.6 kg/l |
| Flash point | 100 °C |
| Gloss | Gloss (70-85) |
| Packaging and delivery | Supplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model |
| Source | Manufacturer technical data sheet (jotun-jotacote-universal-s120.pdf) |
Application and system notes
Application: airless spray / brush / roller (sa 2½ / sa 2 / st 2). Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.
Drying and curing times
| Substrate temperature | 10 °C | 23 °C | 40 °C |
|---|---|---|---|
| Touch dry | 17 h | 7 h | 3 h |
| Walk-on dry | 23 h | 9 h | 4 h |
| Recoat, minimum | 21 h | 8 h | 4 h |
Data taken from the manufacturer's TDS jotun-jotacote-universal-s120.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.
Usually applied as primer; the number of coats and the quantity per unit depend on the surface condition of the steel and the corrosivity of the atmospheric exposure environment.
Standards and approvals
- IMO 2010 FTP
- IMO Res.215(82)
- ISO 12944
- ISO 2813
- ISO 3233
- ISO 3679
- ISO 8501-1
- Norsok M-501
The standard numbers above come from the manufacturer's technical data sheet; original certificates and their conditions of validity can be supplied, or checked against the manufacturer's documents.
Jotacote Universal S120 — requesting technical data
Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).
For the full technical data on Jotacote Universal S120, use the WhatsApp or email link at the foot of this page; the TDS and SDS are sent together.
Jotacote Universal S120 — common questions
What service environment suits Jotacote Universal S120?
The service environment for this model is atmospheric exposure. The corrosivity category determines the coat sequence and film thickness; send the project conditions and the specific build-up can be given.
How many components does Jotacote Universal S120 have, and how is it mixed?
This model is a two-component product. Mixing ratio, pot life and induction time follow the manufacturer's TDS; deviation from the ratio affects curing and adhesion.
Where can I find the technical data for Jotacote Universal S120?
Volume solids, film thickness, spreading rate, drying time and VOC are as stated in the manufacturer's TDS; the current version for this model is available from us.
Models related to Jotacote Universal S120
Back to Products to filter every model by use or type
Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.
Sales & technical support
Detailed data and a quotation for Jotacote Universal S120
We supply Jotun industrial coatings made in China and handle the export. Get in touch.
- WhatsApp Start a chat
- Email max@rich-tech.net