Offshore steel structures and ship coating (heavy-duty)
Model

Jota EP15 MIO epoxy

Jota EP15 MIO (6VN) — in the Jotun range — is a epoxy product normally used as intermediate coat where atmospheric exposure conditions apply. This model offers fast-drying. For the complete technical data, request the manufacturer's TDS and SDS for Jota EP15 MIO.

China-based distributor of Jotun industrial protective coatings — supplied from the China production base to projects worldwide.

This model belongs to the categories below; select a tag to see every model in that category.

Jota EP15 MIO — product overview

Jota EP15 MIO belongs to the epoxy system and is a two-component product used as intermediate coat; service environment atmospheric exposure; application and system notes are set out below.

Jota EP15 MIO — positioning

Jota EP15 MIO is a epoxy intermediate coat from the Jotun range, formulated for steel structures in atmospheric exposure.

The substrate for this product is steel. Prepare the surface as the manufacturer requires, and check ambient temperature, humidity and dew point before starting.

It suits projects where fast-drying matters — tight application windows or demanding maintenance regimes.

It is used for protective coating work in atmospheric exposure conditions.

Jota EP15 MIO — key data

ModelJota EP15 MIO
Manufacturer product name6VN
Resin systemepoxy
Componentstwo-component
Typical number of coatsintermediate coat
Service environmentatmospheric exposure
Key characteristicsfast-drying
Colour rangeLight grey / dark grey / Grey / Red / Light yellow / White
Application methodairless spray / brush / roller
Volume solids71 % ± 2 %
Density (specific gravity)1.54 kg/l
Flash point25 °C
GlossMatt (0-35)
Packaging and deliverySupplied in full drums or full pallets, with staged deliveries to match the progress on site; pack sizes are confirmed per model
SourceManufacturer technical data sheet (jotun-jota-ep15-mio.pdf)

Application and system notes

Application: airless spray / brush / roller. Before application, confirm the surface preparation grade and control ambient temperature and humidity, substrate temperature and dew point as the manufacturer requires; observe the specified recoat intervals.

Drying and curing times

Substrate temperature-5 °C0 °C5 °C10 °C23 °C40 °C
Touch dry10 h8 h6 h4 h2 h1 h
Walk-on dry30 h24 h16 h10 h5 h2 h
Recoat, minimum24 h20 h14 h8 h4 h2 h
Dried/cured for service28 d21 d14 d10 d7 d3 d

Data taken from the manufacturer's TDS jotun-jota-ep15-mio.pdf (page 4); 23 °C is the reference condition, the other columns are given for application in different seasons and regions. The full data sheet is available from us on request.

Coat sequence, film thickness and quantity depend on the service conditions (steel / atmospheric exposure) and the design life: give us the structure type, corrosivity category and area, and the quantity can be calculated.

Standards and approvals

Standards and approvals for Jota EP15 MIO follow the manufacturer's current technical data sheet; tell us the purpose and the recipient if you need scanned certificates.

Jota EP15 MIO — requesting technical data

Volume solids, recommended dry film thickness, theoretical spreading rate, drying and curing times and VOC are itemised in the manufacturer's technical data sheet (TDS).

Full documentation — TDS, SDS, test and certification documents — is available on request: quote the model Jota EP15 MIO and the intended use.

Jota EP15 MIO — common questions

What are the key characteristics of Jota EP15 MIO?

This model offers fast-drying. Suitability for a particular service condition still has to be assessed together with the complete coating system.

How is the recoat interval for Jota EP15 MIO controlled?

The minimum and maximum recoat intervals follow the manufacturer's TDS and must also satisfy the on-site temperature, humidity and dew point conditions.

Which substrates can Jota EP15 MIO be used on?

The TDS lists the substrate as steel; surface preparation must be completed and cleanliness and roughness confirmed, and ambient temperature, humidity and dew point must be within limits before coating.

Models related to Jota EP15 MIO

Back to Products to filter every model by use or type

Model and category information on this page is compiled from the manufacturer's technical data sheets and is provided for selection reference; parameters, application requirements and suitability are governed by the manufacturer's latest technical data sheet and by the actual site conditions. This site does not replace the manufacturer's documents.

Sales & technical support

Detailed data and a quotation for Jota EP15 MIO

We supply Jotun industrial coatings made in China and handle the export. Get in touch.

WeChat QR code
Scan to add us on WeChat